| return back |
|
model: ZJ604F
Features:
*Adopt frequency hopping spread spectrum(FHSS),Anti-interference and sound clarity
*Work Frequency Band: 900MHZ ISM,905¡ª925MHZ
*Long distance transmission,200-300 meters in the open field
*Support 1 receiver matching 2 transmitters,AB Switches for selecting the transmitters
*Transmitter and Receiver need making pairing code before any operation, Confidentiality is strong
*Support 60 simultaneous Users at the same time and without interference each other
*With temperature, bed-wetting, vibration alarm function |
| Specifications: |
| Camera Specification |
A£ºTransmitter Key Function Illustration
1:Antenna
2:LOW/POWER Two-color indicator led,Low voltage/Work and code indicator led£¬functions as below: | | ¡ñGreen indicator led light is on£ºDC Power plugs supply the power or battery supply the power normally£» | | ¡ñRed indicator led light is on:Low battery voltage | | ¡ñGreen indicator led flash£ºparing code state£»After paring code,the code indicator led of the receiver will be off,then short press the power /code key of transmitter is ok.
3:Charging indicator, The LED is on when charging,and the LED is off when the battery is full or without battery.
4£ºDC6V Power Input;
5£ºWet sensor:Wired wet sensor interface | | ¡ñDetect the Child is bed-wetting,the receiver will get alarm voice and the LED light flash;It will stop alarm after removing the wet
6 £ºMicrophone£¬Pick up the sound and signal from Transmitter
7£ºPower/Code Switch | | ¡ñShort press for switch on/Switch off | | ¡ñLong press for paring code when it is shutdown state,two-color green led flash.
8£ºTemperature sensor£¬When the temperature of the transmitter is over 40 degree or below 0 degree,the receiver will get alarm voice and the LED light flash.
9£ºBattery cover,3 pcs AA Dry Battery
|
|
|
| Monitor Specification |
B£ºReceiver Key Function Illustration
1:Antenna
2:Power/Code Switch | | ¡ñShort press for switch on/Switch off | | ¡ñLong press for paring code when it is shutdown state,two-color green led flash.
3.Vibration Setup Key, Set the vibration alert sensitivity
4:A/B channel switch: switch two different channels¡¯ transmitter
5:Charging indicator, The LED is on when charging,and the LED is off when the battery is full or without battery.
6: DC6V Power Input;
7: Two-color indicator led, Work/code indicator led | | ¡ñGreen£ºLong light on stand for normal working; Flashing stand for pairing code state;After pair code,the green led is off and Red led is on£¬then short press the power key/code key of the transmitter,it means the pair code is successful,meantime,the Red led will change into Green and the Green led is on all the time. | | ¡ñRed:stand for not normal working£»
8£¬9£¬10£¬11:4-level volume and alarm indication function | | ¡ñ Wet Alarm,No 8 and No 9 lights flash and the receiver get ¡°Du,Du,Du¡± alarm voice every 4 seconds. | | ¡ñ Temperature Alarm,No 8,9,10 three lights flash and the receiver get ¡°Du,Du,Du¡± alarm voice every 4 seconds
12£ºVibe ON/OFF: Turn on/Turn off the viberation alarm function
13: Two-color indicator led, Low voltage indicator | | ¡ñ Green Led:Battery voltage is normal | | ¡ñ Red Led:Low battery voltage or without battery
14£ºVOL-:Turn down the volume
15£ºVOL+:Increase the volume
16£ºHorn
17£ºBattery cover,3 pcs AA Dry Battery | |
Parameters
Operating frequency£ºISM905-925MHZ | | Transmission power£º10dBm | | Modulation mode£ºFSK | | Spread spectrum method£ºFHHS | | Audio encoding£ºADPCM | | Modulation frequency£º180KHZ | | Code rate: 500Kbps | | Receiver sensitivity£º¨Q-92dBm | | Power supply mode£º6V DC and 3pcs AA battery | | Transmitters operating current£º80MA MAX | | Transmitter standby current£º100UA MAX | | Receiver operating current£º140MA MAX | | Receiver standby current£º100UA MAX | | Charge current£ºMAX 80MA | | Battery specifications£º3pcs 1.2V AA Ni-MH rechargeable battery | | Operating Temperature£º0¡ãC-50¡ãC
|
|
|
| Standard Package Content |
Standard Package Accessories
1£º1¡ÁTransmitter | | 2£º1¡ÁReceiver | | 3£º1¡ÁReceiver Power Plug(6V/500mA) | | 4£º1¡ÁTransmitter Power Plug(6V/500mA) | | 5£®1¡ÁManual User
|
|
|
| Packing |
|
| return back |
|
