II£ºOperating instruction |
| 1£ºSwitch on Operation |
| After connecting AC power, the red indicate light is on. Press the Power ON/OFF button on the remote control to turn on the bulb (press button to switch on, another second to switch off).After three seconds, the blue indicate light is on, bulb boot into standby. |
| 2: Video record |
| A£ºmanual video recording |
| You can press the manual recording button of the bulb to start recording, another second to stop recording. Camera will record circularly till you stop it, video file saved every 5 minutes (Max 5 minutes). |
| B: Manual video recording by Remote control |
| Press the "Video Start/Stop" button of remote control in standby, camera start to record, press again, it stops . |
| Note: the blue indicator light flashing means video recording, blue constant light, that is, boot into standby |
| 3: Motion detection |
| After turning on the power supply, the bulb start into the normal working state, press the button of remote control, after the blue indicator light flashing twice, camera start into the motion detection mode, press again, the blue indicator light flashes once, camera is in standby. |
| Note: When something is always moving, video recording continue till there is no moving something for 5 seconds. |
| 4: Photo |
| After the power is turned on, the bulb is into the normal working state, press Photo button to take photo once. |
| 5: Turn on the white light |
| After turning on the power supply, press Light ON/OFF button to turn on the white light, another second to turn off it. |
| Note: When white light is on, infrared light is off at any time.
III Electrical Parameters£º |
| Function description |
| Photo & Video resolution 1280*720 |
| Video format 30 fps |
| Working voltage AC110-240V |
| Plug connector E27£¨e27 ordinary screw bulb£© |
| TF card Support 128MB-32GB |
| camera resolution 1/4 chip 130 million pixel |
| Night vision distance 4-6m,the white light 3-5m |
| Product total power 4W MAX |
| Lens 3.6MM |
| Remote control distance 3-5m |
| Remote control butteries CR2025 3V button battery |
| PC software system Support win XP win7 |
| |
|
